Origins and composition of fine atmospheric carbonaceous aerosol in the Sierra Nevada Mountains, California

In this paper we report chemically resolved measurements of organic aerosol (OA) and related tracers during the Biosphere Effects on Aerosols and Photochemistry Experiment (BEARPEX) at the Blodgett Forest Research Station, California from 15 August–10 October 2007. OA contributed the majority of the mass to the fine atmospheric particles and was predominately oxygenated (OOA). The highest concentrations of OA were during sporadic wildfire influence when aged plumes were impacting the site. In situ measurements of particle phase molecular markers were dominated by secondary compounds and along with gas phase compounds could be categorized into six factors or sources: (1) aged biomass burning emissions and oxidized urban emissions, (2) oxidized urban emissions (3) oxidation products of monoterpene emissions, (4) monoterpene emissions, (5) anthropogenic emissions and (6) local methyl chavicol emissions and oxidation products. There were multiple biogenic components that contributed to OA at this site whose contributions varied diurnally, seasonally and in response to changing meteorological conditions, e.g. temperature and precipitation events. Concentrations of isoprene oxidation products were larger when temperatures were higher during the first half of the campaign (15 August–12 September) due to more substantial emissions of isoprene and enhanced photochemistry. The oxidation of methyl chavicol, an oxygenated terpene emitted by ponderosa pine trees, contributed similarly to OA throughout the campaign. In contrast, the abundances of monoterpene oxidation products in the particle phase were greater during the cooler conditions in the latter half of the campaign (13 September–10 October), even though emissions of the precursors were lower, although the mechanism is not known. OA was correlated with the anthropogenic tracers 2-propyl nitrate and carbon monoxide (CO), consistent with previous observations, while being comprised of mostly non-fossil carbon (>75%). The correlation between OA and an anthropogenic tracer does not necessarily identify the source of the carbon as being anthropogenic but instead suggests a coupling between the anthropogenic and biogenic components in the air mass that might be related to the source of the oxidant and/or the aerosol sulfate. Observations of organosulfates of isoprene and α-pinene provided evidence for the likely importance of aerosol sulfate in spite of neutralized aerosol although acidic plumes might have played a role upwind of the site. This is in contrast to laboratory studies where strongly acidic seed aerosols were needed in order to form these compounds. These compounds together represented only a minor fraction (<1%) of the total OA mass, which may be the result of the neutralized aerosol at the site or because only a small number of organosulfates were quantified. The low contribution of organosulfates to total OA suggests that other mechanisms, e.g. NO_x enhancement of oxidant levels, are likely responsible for the majority of the anthropogenic enhancement of biogenic secondary organic aerosol observed at this site

Global atmospheric budget of acetaldehyde: 3-D model analysis and constraints from in-situ and satellite observations

We construct a global atmospheric budget for acetaldehyde using a 3-D model of atmospheric chemistry (GEOS-Chem), and use an ensemble of observations to evaluate present understanding of its sources and sinks. Hydrocarbon oxidation provides the largest acetaldehyde source in the model (128 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;, a factor of 4 greater than the previous estimate), with alkanes, alkenes, and ethanol the main precursors. There is also a minor source from isoprene oxidation. We use an updated chemical mechanism for GEOS-Chem, and photochemical acetaldehyde yields are consistent with the Master Chemical Mechanism. We present a new approach to quantifying the acetaldehyde air-sea flux based on the global distribution of light absorption due to colored dissolved organic matter (CDOM) derived from satellite ocean color observations. The resulting net ocean emission is 57 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;, the second largest global source of acetaldehyde. A key uncertainty is the acetaldehyde turnover time in the ocean mixed layer, with quantitative model evaluation over the ocean complicated by known measurement artifacts in clean air. Simulated concentrations in surface air over the ocean generally agree well with aircraft measurements, though the model tends to overestimate the vertical gradient. PAN:NO&lt;sub&gt;x&lt;/sub&gt; ratios are well-simulated in the marine boundary layer, providing some support for the modeled ocean source. We introduce the Model of Emissions of Gases and Aerosols from Nature (MEGANv2.1) for acetaldehyde and ethanol and use it to quantify their net flux from living terrestrial plants. Including emissions from decaying plants the total direct acetaldehyde source from the land biosphere is 23 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;. Other terrestrial acetaldehyde sources include biomass burning (3 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;) and anthropogenic emissions (2 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;). Simulated concentrations in the continental boundary layer are generally unbiased and capture the spatial gradients seen in observations over North America, Europe, and tropical South America. However, the model underestimates acetaldehyde levels in urban outflow, suggesting a missing source in polluted air. Ubiquitous high measured concentrations in the free troposphere are not captured by the model, and based on present understanding are not consistent with concurrent measurements of PAN and NO&lt;sub&gt;x&lt;/sub&gt;: we find no compelling evidence for a widespread missing acetaldehyde source in the free troposphere. We estimate the current US source of ethanol and acetaldehyde (primary + secondary) at 1.3 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt; and 7.8 Tg a&lt;sup&gt;&amp;minus;1&lt;/sup&gt;, approximately 60{%} and 480% of the corresponding increases expected for a national transition from gasoline to ethanol fuel

On the Integration of Automatic Deployment into the ABS Modeling Language

In modern software systems, deployment is an integral and critical part of application development (see, e.g., the DevOps approach to software development). Nevertheless, deployment is usually overlooked at the modeling level, thus losing the possibility to perform deployment conscious decisions during the early stages of development. In this paper, we address the problem of promoting deployment as an integral part of modeling, by focusing on the Abstract Behavioral Specification (ABS) language used for the specification of models of systems composed of concurrent objects consuming resources provided by deployment components. We extend ABS with class annotations expressing the resource requirements of the objects of that class. Then we define a tool that, starting from a high-level declaration of the desired system, computes a model instance of such system that optimally distributes objects over available deployment components

Quantifying sources of methane using light alkanes in the Los Angeles basin, California

Methane (CH4), carbon dioxide (CO2), carbon monoxide (CO), and C2-C5 alkanes were measured throughout the Los Angeles (L.A.) basin in May and June 2010. We use these data to show that the emission ratios of CH4/CO and CH4/CO2 in the L.A. basin are larger than expected from population-apportioned bottom-up state inventories, consistent with previously published work. We use experimentally determined CH4/CO and CH4/CO2 emission ratios in combination with annual State of California CO and CO2 inventories to derive a yearly emission rate of CH4 to the L.A. basin. We further use the airborne measurements to directly derive CH4 emission rates from dairy operations in Chino, and from the two largest landfills in the L.A. basin, and show these sources are accurately represented in the California Air Resources Board greenhouse gas inventory for CH4. We then use measurements of C2-C5 alkanes to quantify the relative contribution of other CH4 sources in the L.A. basin, with results differing from those of previous studies. The atmospheric data are consistent with the majority of CH4 emissions in the region coming from fugitive losses from natural gas in pipelines and urban distribution systems and/or geologic seeps, as well as landfills and dairies. The local oil and gas industry also provides a significant source of CH4 in the area. The addition of CH4 emissions from natural gas pipelines and urban distribution systems and/or geologic seeps and from the local oil and gas industry is sufficient to account for the differences between the top-down and bottom-up CH4 inventories identified in previously published work. Key PointsTop-down estimates of CH4 emissions in L.A. are greater than inventory estimatesEstimates of CH4 emissions from landfills in L.A. agree with CARB inventoryPipeline natural gas and/or seeps, and landfills are main sources of CH4 in L.A. ©2013. American Geophysical Union. All Rights Reserved

Chemical data quantify Deepwater Horizon hydrocarbon flow rate and environmental distribution

Author Posting. © The Author(s), 2011. This is the author's version of the work. It is posted here by permission of National Academy of Sciences for personal use, not for redistribution. The definitive version was published in Proceedings of the National Academy of Sciences of the United States of America (2012), doi:10.1073/pnas.1110564109.Detailed airborne, surface, and subsurface chemical measurements, primarily obtained in May and June 2010, are used to quantify initial hydrocarbon compositions along different transport pathways – in deep subsurface plumes, in the initial surface slick, and in the atmosphere – during the Deepwater Horizon (DWH) oil spill. Atmospheric measurements are consistent with a limited area of surfacing oil, with implications for leaked hydrocarbon mass transport and oil drop size distributions. The chemical data further suggest relatively little variation in leaking hydrocarbon composition over time. While readily soluble hydrocarbons made up ~25% of the leaking mixture by mass, subsurface chemical data show these compounds made up ~69% of the deep plume mass; only ~31% of deep plume mass was initially transported in the form of trapped oil droplets. Mass flows along individual transport pathways are also derived from atmospheric and subsurface chemical data. Subsurface hydrocarbon composition, dissolved oxygen, and dispersant data are used to provide a new assessment of release of hydrocarbons from the leaking well. We use the chemical measurements to estimate that (7.8±1.9) x106 kg of hydrocarbons leaked on June 10, 2010, directly accounting for roughly three-quarters of the total leaked mass on that day. The average environmental release rate of (10.1 ± 2.0) x106 kg/day derived using atmospheric and subsurface chemical data agrees within uncertainties with the official average leak rate of (10.2 ± 1.0) x106 kg/day derived using physical and optical methods.This research was supported by the National Science Foundation through grants to D. Blake (AGS-1049952), J. Kessler (OCE-1042650 and OCE-0849246), D. Valentine (OCE-1042097 and OCE-0961725), E. Kujawinski (OCE-1045811), and R. Camilli (OCE-1043976), by U.S. Coast Guard contract to R. Camilli (Contract HSCG3210CR0020), and by U.S. Department of Energy grant to D. Valentine (DE- NT0005667). The August, September, and October research cruises were funded by NOAA through a contract with Consolidated Safety Services, Incorporated. The NOAA P-3 oil spill survey flights were funded in part by NOAA and in part by a U.S. Coast Guard Pollution Removal Funding Authorization to NOAA

Measurements of Gas‐Phase Inorganic and Organic Acids from Biomass Fires by Negative‐Ion Proton‐Transfer Chemical‐Ionization Mass Spectrometry

[1] Emissions from 34 laboratory biomass fires were investigated at the combustion facility of the U.S. Department of Agriculture Fire Sciences Laboratory in Missoula, Montana. Gas-phase organic and inorganic acids were quantified using negative-ion proton-transfer chemical-ionization mass spectrometry (NI-PT-CIMS), open-path Fourier transform infrared spectroscopy (OP-FTIR), and proton-transfer-reaction mass spectrometry (PTR-MS). NI-PT-CIMS is a novel technique that measures the mass-to-charge ratio (m/z) of ions generated from reactions of acetate (CH3C(O)O−) ions with inorganic and organic acids. The emission ratios for various important reactive acids with respect to CO were determined. Emission ratios for isocyanic acid (HNCO), 1,2 and 1,3-benzenediols (catechol, resorcinol), nitrous acid (HONO), acrylic acid, methacrylic acid, propionic acid, formic acid, pyruvic acid, and glycolic acid were measured from biomass burning. Our measurements show that there is a significant amount of HONO in fresh smoke. The NI-PT-CIMS measurements were validated by comparison with OP-FTIR measurements of HONO and formic acid (HCOOH) and with PTR-MS measurements of HCOOH

An updated survey on the use of geospatial technologies in New Zealand’s plantation forestry sector

Background: Geospatial technologies have developed rapidly in recent decades and can provide detailed, accurate data to support forest management. Knowledge of the uptake of geospatial technologies, as well as barriers to adoption, in New Zealand’s plantation forest management sector is limited and would be beneficial to the industry. This study provides an update to the 2013 benchmark study by Morgenroth and Visser. Methods: An online survey was sent to 29 companies that own or manage plantation forests in New Zealand. The survey was split into seven sections, composed of multiple-choice and open-ended questions, on the topics of: demographic information, data portals and datasets, global navigation satellite system (GNSS) receivers, and four remote-sensing technologies. These included aerial imagery, multispectral imagery, hyperspectral imagery, and light detection and ranging (LiDAR). Each section included questions relating to the acquisition, application and products created from each remote-sensing technology. Questions were also included that related to the barriers preventing the uptake of technologies. To determine the progression in the uptake of these technologies the results were compared to Morgenroth and Visser's study conducted five years' earlier. Results: Twenty-three companies responded to the survey and together, those companies managed approximately 1,172,000 ha (or 69% of New Zealand’s 1.706 million ha plantation forest estate (NZFOA, 2018)). The size of the estates managed by individual companies ranged from 1,000 ha to 177,000 ha (quartile 1 = 19,000 ha, median = 33,000 ha, quartile 3 = 63,150 ha). All companies used GNSS receivers and acquired three-band, Red-Green-Blue, aerial imagery. Multispectral imagery, hyperspectral imagery and LiDAR data were acquired by 48%, 9% and 70% of companies, respectively. Common applications for the products derived from these technologies were forest mapping and description, harvest planning, and cutover mapping. The main barrier preventing companies from acquiring most remotely-sensed data was the lack of staff knowledge and training, though cost was the main barrier to LiDAR acquisition. The uptake of all remote-sensing technologies has increased since 2013. LiDAR had the largest progression in uptake, increasing from 17% to 70%. There has also been a change in the way companies acquired the data. Many of the companies used unpiloted aerial vehicles (UAV) to acquire aerial and multispectral imagery in 2018, while in 2013 no companies were using UAVs. ESRI ArcGIS continues to be the dominant geographic information system used by New Zealand’s forest management companies (91%), though 22% of companies now use free GIS software, like QGIS or GRASS. The use of specialised software (e.g. FUSION, LAStools) for LiDAR or photogrammetric point cloud analysis increased since 2013, but most forestry companies who are processing .las files into various products (e.g. digital terrain model) are using ArcGIS. Conclusions: This study showed that there had been a progression in the uptake of geospatial technologies in the New Zealand plantation forest management sector. However, there are still barriers preventing the full utilisation of these technologies. The results suggest that the industry could benefit from investing in more training relating to geospatial technologies

Emissions of organic carbon and methane from petroleum and dairy operations in California's San Joaquin Valley

Petroleum and dairy operations are prominent sources of gas-phase organic compounds in California's San Joaquin Valley. It is essential to understand the emissions and air quality impacts of these relatively understudied sources, especially for oil/gas operations in light of increasing US production. Ground site measurements in Bakersfield and regional aircraft measurements of reactive gas-phase organic compounds and methane were part of the CalNex (California Research at the Nexus of Air Quality and Climate Change) project to determine the sources contributing to regional gas-phase organic carbon emissions. Using a combination of near-source and downwind data, we assess the composition and magnitude of emissions, and provide average source profiles. To examine the spatial distribution of emissions in the San Joaquin Valley, we developed a statistical modeling method using ground-based data and the FLEXPART-WRF transport and meteorological model. We present evidence for large sources of paraffinic hydrocarbons from petroleum operations and oxygenated compounds from dairy (and other cattle) operations. In addition to the small straight-chain alkanes typically associated with petroleum operations, we observed a wide range of branched and cyclic alkanes, most of which have limited previous in situ measurements or characterization in petroleum operation emissions. Observed dairy emissions were dominated by ethanol, methanol, acetic acid, and methane. Dairy operations were responsible for the vast majority of methane emissions in the San Joaquin Valley; observations of methane were well correlated with non-vehicular ethanol, and multiple assessments of the spatial distribution of emissions in the San Joaquin Valley highlight the dominance of dairy operations for methane emissions. The petroleum operations source profile was developed using the composition of non-methane hydrocarbons in unrefined natural gas associated with crude oil. The observed source profile is consistent with fugitive emissions of condensate during storage or processing of associated gas following extraction and methane separation. Aircraft observations of concentration hotspots near oil wells and dairies are consistent with the statistical source footprint determined via our FLEXPART-WRF-based modeling method and ground-based data. We quantitatively compared our observations at Bakersfield to the California Air Resources Board emission inventory and find consistency for relative emission rates of reactive organic gases between the aforementioned sources and motor vehicles in the region. We estimate that petroleum and dairy operations each comprised 22% of anthropogenic non-methane organic carbon at Bakersfield and were each responsible for 8-13% of potential precursors to ozone. Yet, their direct impacts as potential secondary organic aerosol (SOA) precursors were estimated to be minor for the source profiles observed in the San Joaquin Valley